Description

This 808nm 500w diode laser stack 10 bars Model D for hair removal which has 10 bars with a aluminum shell. The water connectors are on the side. One is straight. another is right angle. One electrode is on the top. another electrode is on the bottom.

It is used for most of 808nm 10bars diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064. 

This diode laser stack usually burn out after working 1 year. Then it need to be refresh. Or you can buy a new one to replace the old one.


Repairing procedure

>Choice A: Send the old broken 808nm diode laser handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new diode laser handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.  

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 


Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.           


Specification       


tbodytbody

Model No. 

VS-MA-10-1.0-Model  D

Application

808nm 10bars macro laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement


Flow rate

>3.5L/min 

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

 

Dimension


Application


Write a review

Note: HTML is not translated!
    Bad           Good

VS-MA-50-10 Model D-GTHM-500-808 10bars macro laser module water connectors are on the side

  • Product Code: VS-MA-50-10 Model D-GTHM-500
  • Reward Points: 100
  • Availability: In Stock
  • $2,200.00

  • Price in reward points: 1000