Soprano ICE laser stack Description

This VS-MI-100-12-AlmaSopranoICE-D is special laser stack for Soprano ICE Alexsander or YAG 1060nm handpiece. The stack has 12 bars with a aluminum shell. The electrodes are on the side of the stack. Water connectors are on the bottom.

It is used for Alma Soprano handle piece repairing and replacement.

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the

laser soprano power.


Soprano ice laser stack Repairing procedure

>Choice A: Send the old broken Soprano ICE handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new Soprano ICE handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the Soprano ICE diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old Soprano ICE handpiece.  


replacement Soprano ice laser stack Advantages

>Save Money. Replace the broken Soprano ICE diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.                   


Soprano ICE laser stack Specification

Model No

VS-MI-100-12-AlmaSopranoICE-D

Application

Alma Soprano Handle Piece Repair And Replacement

Operation Mode

CW

Number of submounts

12 Bars

Power per submounts

100W

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

90A

Typical Threshold current

15A

Maximum Operating Voltage

24V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Expected lifetime

>10000 Hours

Typical pitch per bar

1.8mm

Cooling


Flow rate

0.3L/min ±10% / Bar

Water Temperature

25+-3°C

Water Quality

Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

cooling system

Do not use any material that combination with copper would form galvanic elements


Soprano ICE laser stack Dimension



Write a review

Note: HTML is not translated!
    Bad           Good

VS-MI-100-12-AlmaSopranoICE-D-808nm 12bars soprano ice laser stack

  • Product Code: VS-MI-100-12-AlmaSopranoICE-D-808nm
  • Availability: In Stock
  • $4,200.00



Tags: alma