808 hair removal handle repair Description

This 5bars 808 diode laser hair removal handpiece model X is made of  5pcs diode bar with micro channel cooler.  The laser bar in this handpiece is VS-MI-100-6-FL-A

Whole handpiece is made in China.  

Service mode: Repair the broken diode laser in the handpiece. Such as replace new laser stack, test TEC peltier, cleaning and so on. 

808 hair removal handle Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

Related laser stack which match the 808nm hair removal handpiece model M -China A  VS-MI-100-6-FL-A



5bars micro channel 808 hair removal handle repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.                  

Model No. 808nm Diode laser hair removal handpiece model X
Application808nm/810nm diode laser hair removal machine
Operation ModeCW
Power per submounts100W
Number of submounts in one stack5bars
Central wavelength at 25808 ± 5nm
Typical Operation current60A
Maximum Operating current90A
Typical Threshold current15A
Maximum Operating Voltage<12V
Fast Axis Divergence (FWHM)39º
Slow Axis Divergence (FWHM)
Operation Conditionnon-condensing atmosphere, cleaning room
Expected lifetime10000 urs
Typical pitch per bar1.8mm
Cooling requirement
Flow rate1.5L/min +-10%
Water Temperature25+-3°C
Water QualityDeionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling systemDo not use any material that combination with copper would form galvanic elements

laser diode Dimension:

laser diode Detail Photos:






Write a review

Note: HTML is not translated!
    Bad           Good

5bars micro channel 808 diode laser hair removal handle repair

  • Product Code: 808nm Diode laser hair removal handpiece model X
  • Availability: In Stock
  • $1,580.00