Aroma bule handpiece repair Description
This VS-MI-100-5-FL-B is an 808nm diode laser stack, which has 5pcs 100w bars with PEEK side plate and aluminum shell. Electrodes are on the back of the stack. This kinds of stack maybe have 3 real bars with 2 decorate bars or 4 real bars with 1 decorate bars or 5 real bars.
It is used for 808nm diode laser hair removal handpiece repairing and replacement. Exp: Aroma diode (3 real bars & 2 decorate bars)
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.
808 Aroma bule handpiece Repairing procedure
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
808 Aroma bule handpiece repair Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient.
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before.
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
808nm Aroma laser diode Specification
laser hair removal Handpiece Repair And Replacement exp: Aroma diode
Power per submounts
Number of submounts in one stack
Central wavelength at 25℃
808 ± 5nm
Typical Operation current
Maximum Operating current
Typical Threshold current
Maximum Operating Voltage
Fast Axis Divergence (FWHM)
Slow Axis Divergence (FWHM)
non-condensing atmosphere, cleaning room
Typical pitch per bar
Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
Do not use any material that combination with copper would form galvanic elements