Syneron laser hair removal handle repair Description:

This 8bars 808nm syneron diode laser hair removal handpiece model V-syneron  is made of 8 pcs diode bar with micro channel cooler. Total optical power is 800W. The diode laser bars in this handpiece is VS-MI-100-8-Syneron A.

Whole 808nm handpiece is made in China.  

Service mode: Repair the broken diode laser in the handpiece. Such as replace new laser stack, test TEC peltier, cleaning and so on. 

808nm Syneron laser handle Repairing procedure 

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

Related laser stack which match the 808nm hair removal handpiece  model V-syneron VS-MI-100-8-Syneron A

808nm Syneron laser handle repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.     

Syneron 808nm laser diode Specification

Model No. 808nm Diode laser hair removal handpiece model V-syneron
ApplicationSyneron elos motif HR 808nm/810nm diode laser hair removal machine
Operation ModeCW
Power per submounts100W
Number of submounts in one stack8bars
Central wavelength at 25808 ± 5nm
Typical Operation current60A
Maximum Operating current90A
Typical Threshold current15A
Maximum Operating Voltage<12V
Fast Axis Divergence (FWHM)39º
Slow Axis Divergence (FWHM)
Operation Conditionnon-condensing atmosphere, cleaning room
Expected lifetime10000hours
Typical pitch per bar1.8mm
Cooling requirement
Flow rate0.9L/min +-10%
Water Temperature25+-3°C
Water QualityDeionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling systemDo not use any material that combination with copper would form galvanic elements

Write a review

Note: HTML is not translated!
    Bad           Good

8bar 808nm diode laser Syneron laser hair removal machine handpiece repair

  • Product Code: 808 handpiece model V repair only-syneron
  • Availability: In Stock
  • $2,850.00