This VS-MI-100-12-AlmaSoprano-A is Alma Soprano 12 bar laser stack with PEEK side plate. The electrodes are on the back of the stack.
It is used for Alma Soprano handle piece repairing and replacement.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the
laser soprano power.
alma soprano handle Repairing procedure
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
alma soprano handle repair Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
alma soprano laser stack Specification
Alma Soprano Handle Piece Repair And Replacement
Number of submounts
Power per submounts
Central wavelength at 25℃
808 ± 5nm
Typical Operation current
Typical Threshold current
Maximum Operating Voltage
Fast Axis Divergence (FWHM)
Slow Axis Divergence (FWHM)
Typical pitch per bar
0.3L/min ±10% / Bar
Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
Do not use any material that combination with copper would form galvanic elements