This VS-MI-100-12-AlmaSoprano-E is Alma Soprano 12 bar laser stack with black side plate & right-angled electrode.

It is used for Alma Soprano handle piece repairing and replacement.

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the

laser soprano power.

Alma soprano ice handle Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

Repair Alma soprano ice handle Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.                   

Alma Soprano ice 12bar laser stack Specification

Model No



Alma Soprano ice Handle Piece Repair And Replacement

Operation Mode


Number of submounts

12 Bars

Power per submounts


Central wavelength at 25℃

808 ± 5nm

Typical Operation current


Typical Threshold current


Maximum Operating Voltage


Fast Axis Divergence (FWHM)


Slow Axis Divergence (FWHM)

Expected lifetime

>10000 Hours

Typical pitch per bar



Flow rate

0.3L/min ±10% / Bar

Water Temperature


Water Quality

Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

cooling system

Do not use any material that combination with copper would form galvanic elements

alma laser stack Dimension

Write a review

Note: HTML is not translated!
    Bad           Good

VS-MI-100-12-AlmaSoprano-E-808nm 12bars Alma laser stack

  • Product Code: VS-MI-100-12-AlmaSoprano-E-808nm
  • Availability: In Stock
  • $4,200.00

Tags: alma soprano laser stack