No products in the cart.

Free Delivery & 60-Day Returns* - Everyday!


No products in the cart.

Home Soprano ICE Platinium/Soprano Titanium DIODE 810nm-1CM VS-MI-100-12-AlmaSoprano-C-808nm 12bars alma laser stack black side plate

VS-MI-100-12-AlmaSoprano-C-808nm 12bars alma laser stack black side plate

(1 customer review)

Product Code: VS-MI-100-12-AlmaSoprano-C-808nm
Availability: In Stock



This VS-MI-100-12-AlmaSoprano-C is an Alma Soprano 12-bar laser stack with a black side plate & right-angled electrode.
It is used for Alma Soprano handle piece repairing and replacement.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks. Also, we can use the same Jenoptik bar as Alma used to recondition the power of the laser soprano power.

Ice Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack that matches your old handpiece.

Repair alma soprano ice Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Austin mounting technology will be applied when repairing. After repair. The handpiece will be a new one. lifetime is much longer than before
>All technical support available. We majored in diode laser mounting, software, and spare parts for over 16 years. All the technologies about laser hair removal machines are open to you.

Alma Soprano ice laser stack Specification

Model No                               VS-MI-100-12-AlmaSoprano-C
Application                            Alma Soprano Handle Piece Repair And Replacement

Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 12 bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation Current 90A
Typical Threshold current 15A
Maximum Operating Current 24A
Maximum Operating Voltage 24V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Expected lifetime 10000 hours
Typical pitch per bar 1.8 mm
Cooling requirement
Flow rate 0.3L/min ±10% / Bar
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger, particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements


Ice laser stack Dimension



1 review for VS-MI-100-12-AlmaSoprano-C-808nm 12bars alma laser stack black side plate

  1. mersad

    hi i want a laser bar

Add a review

Your email address will not be published. Required fields are marked *