808nm 500w 10bars macro channel diode laser hair removal handpiece repair
OVERVIEW
808 diode Laser handle repair Description
This 808nm hair removal handpiece model H -China A is made of a 10bars laser stack with 500W optic power.
Most of this handpiece will be broken after 1-2 million shots. then the laser stack which is in it will burn out. We remove the old burnt bar and replace it with a new bar. After that, the handpiece will become a new one.
Repairing procedure
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
Macro diode laser hair removal repair Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Austin mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We majored in diode laser mounting, software, and spare parts for over 16 years. All the technologies about laser hair removal machines are open to you.
808nm 500w macro diode laser Specification
Model No 808nm hair removal handpiece model H repair only-China A
Application 808nm 10bars diode laser hair removal machine which is made in china
Operation Mode | CW |
Optic Power per handpiece | 500W |
Optic Power per submounts | 50W |
Number of submounts in one stack | 10bars |
Maximum Operating current | 50A |
Typical Operation current | 40A |
Typical Threshold current | 15A |
Number of submounts in one stack | 808 ± 5nm |
Maximum Operating Voltage | <20V |
Fast Axis Divergence (FWHM) | 39º |
Slow Axis Divergence (FWHM) | 8º |
Expected lifetime | 10 millions shots |
Typical pitch per bar | 2mm |
Flow rate | 3.6L/min +-10% |
Water Temperature | 25+-3°C |
Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
Cooling system | Do not use any material that combination with copper would form galvanic elements |
808 laser hair removal handpiece Repair



RELATED PRODUCTS
REVIEWS
Reviews
There are no reviews yet.