VS-MA-50-10 Model A-DVS-500-808 500w macro laser stack water holes on the back

20v voltage 10bars 808nm diode laser stack Description

This diode laser stack 10 bars Model A for hair removal handle repair which has 10 bars with a aluminum shell. The water holes are on the back of the stack.  Electrodes are on the back of stack also.

It is used for most of 808nm diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064. 

This 808nm diode laser stack usually burn out after working 1 year. Then it need to be refresh. Or you can buy a new one to replace the old one.

20v voltage 10bars 808nm diode laser stack Repairing procedure

>Choice A: Send the old broken diode laser handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new hair removal handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

20v voltage 10bars 808nm diode laser stack Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.    

20v voltage 10bars 808nm diode laser stack Specification

20v voltage 10bars 808nm diode laser stack Dimension