VS-MA-50-10 Model E-GTHM-500-808 10 bars laser diode with a aluminum shell

10bars 808nm diode laser stack Description

This 808nm diode laser stack 10 bars Model E for hair removal which has 10 bars with a aluminum shell. The water holes are on the back of the stack.  Electrodes are on the back of stack also.

It is used for most of 808nm 10bars diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064. 

This diode laser stack usually burn out after working 1 year. Then it need to be refresh. Or you can buy a new one to replace the old one.

808nm hair removal handle Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

500w 808nm hair removal handle repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.    

Specification

10bars 808nm laser diode Dimension