VS-MA-50-10 Model I-GTHM-500-808 macro laser diode for LLD handpiece
Product Code: VS-MA-50-10 Model I-GTHM-500-808
Availability: In Stock
This VS-MA-50-10 Model I-GTHM-500-808 laser el 808nm laser diode is a special laser stack for the China LLD handpiece. The stack has 10 bars with an aluminum shell. The electrodes are on the side of the stack. Water connectors are on the bottom.
Because of the macro channel cooler. the cooling capacity is not enough for this Model O handpiece. Most of this handpiece will be broken after 1-2 million shots. then the laser stack which is in it will burn out.
We remove the old burnt bar and replace it with a new bar. After that, the handpiece will become a new one.
10bars diode laser hair removal handpiece Repairing procedure
>Choice A: Send the old broken 10bars handpiece to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack that matches your old handpiece.
Related laser stack which matches the 808nm hair removal handpiece model J VS-MI-60-12-AlmaSopranoICE-D
Hair removal handpiece repair Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Austin mounting technology will be applied when repairing. After repair. The handpiece will be a new one. lifetime is much longer than before
>All technical support for the hair removal machine is available. Such as handpiece parts, electronic board, programs, cooling and etc.
Macro 10 bars diode laser stack Specification
Model No 808nm hair removal handpiece model O repair only
Application 808nm diode laser hair removal machine
|Optic Power per handpiece||500W|
|Optic Power per submounts||50W|
|Number of submounts in one stack||10bars|
|Maximum Operating Current||50A|
|Typical Operation Current||40A|
|Typical Threshold current||15A|
|Number of submounts in one stack||808 ± 5nm|
|Maximum Operating Voltage||<20V|
|Fast Axis Divergence (FWHM)||39º|
|Slow Axis Divergence (FWHM)||8º|
|Expected lifetime||10 million shots|
|Typical pitch per bar||2mm|
|Flow rate||3.6L/min +-10%|
|Water Quality||Deionized 2-10 µs/cm, mixed bed ion exchanger, particle filter<25µm|
|Cooling system||Do not use any material that combination with copper would form galvanic elements|
Macro channel 10bars diode laser stack Dimension