No products in the cart.

Free Delivery & 60-Day Returns* - Everyday!


No products in the cart.

Home Uncategorized VS-MA-50-32(2×16) Model A-808 32pcs diode laser of ADSS or Apolomed

VS-MA-50-32(2×16) Model A-808 32pcs diode laser of ADSS or Apolomed


Product Code: VS-MA-50-32(2×16) Model A
Availability: In Stock




This diode laser stack VS-MA-50-32(2×16) Model A for hair removal which has a 2pcs 16bars vertical stack assembled together. totally 32pcs diode laser bars in one aluminum shell. The optical power is 1600W. These 1600W diode lasers are usually used in high-power big window size diodes laser hair removals machines such as equipment brand ADSS or Apolomed. The water is on the bottom. And electrode is on the back.
It is used for most diode laser hair removal machines from China. wavelength 808 or mix wavelength as 755, 808, and 1064.
This diode laser stack usually burns out after working for 1 year. Then it needs to be refreshed. Or you can buy a new one to replace the old one.

Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack that matches your old handpiece.


>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Austin mounting technology will be applied when repairing. After repair. The handpiece will be a new one. lifetime is much longer than before
>All technical support available. We majored in diode laser mounting, software, and spare parts for over 16 years. All the technologies about laser hair removal machines are open to you.


Model                                        No. VS-MA-50-32(2×16) Model A
Application                                 laser hair removal handpiece Repair And Replacement

Operation Mode CW
Power per submounts 50W
Total optical power 1600W
Number of submounts in one stack 32 bars
Central wavelength at 25℃ 808 ± 5nm, 755nm and 1064 nm upon require
Typical Operation Current 40A
Maximum Operating Current 50A
Typical Threshold current 8A
Maximum Operating Voltage <20V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condensing atmosphere, cleaning room
Expected lifetime 10 millions shots
Typical pitch per bar 2 mm
Cooling requirement
Flow rate >3L/min
Water Temperature 27+-3°C
Water Quality pure water
cooling system Do not use any material that combination with copper would form galvanic elements





There are no reviews yet.

Be the first to review “VS-MA-50-32(2×16) Model A-808 32pcs diode laser of ADSS or Apolomed”

Your email address will not be published. Required fields are marked *