VS-MA-50-32(2×16) Model A-808 32pcs diode laser of Apolomed
This diode laser stack VS-MA-50-32(2×16) Model A for hair removal which has 2pcs 16bars vertical stack assembled together. totally 32pcs diode laser bars in one aluminum shell. The optical power is 1600W. This 1600W diode lasers usually used in high power big window size diode laser hair removal machine such as equipment brand ADSS or Apolomed. The water are on the bottom. And electrode is on the back.
It is used for most of diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064.
This diode laser stack usually burn out after working 1 year. Then it need to be refresh. Or you can buy a new one to replace the old one.
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
|Model No.||VS-MA-50-32(2×16) Model A|
|Application||laser hair removal handpiece Repair And Replacement|
|Power per submounts||50W|
|Total optical power||1600W|
|Number of submounts in one stack||32 bars|
|Central wavelength at 25℃||808 ± 5nm, 755nm and 1064 nm upon require|
|Typical Operation current||40A|
|Maximum Operating current||50A|
|Typical Threshold current||8A|
|Maximum Operating Voltage||<20V|
|Fast Axis Divergence (FWHM)||39º|
|Slow Axis Divergence (FWHM)||8º|
|Operation Condition||non-condensing atmosphere, cleaning room|
|Expected lifetime||10 millions shots|
|Typical pitch per bar||2 mm|
|Water Quality||pure water|
|cooling system||Do not use any material that combination with copper would form galvanic elements|