VS-MA-50-5-GTH-808 5bar macro diode laser for Aroma Handpiece Repair
Product Code: VS-MA-50-5-GTH-808
Availability: In Stock
808 Aroma Handpiece Repair Description
5bar macro diode laser Aroma Handpiece Repair, this VS-MA-50-5-GTH is an 808nm diode laser stack, which has 5pcs bars mounted on a big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. This kind of laser stack maybe has 3 real bars with 2 decorate bars or 4 real bars with 1 decorate bar or 5 real bars.
It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machines from China.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks. Also, we can use the same Jenoptik bar like Alma used to recondition the power of the laser soprano power.
808 Aroma handpiece Repairing procedure
>Choice A: Send the old broken 808 handpieces to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack that matches your old handpiece.
5bars 808 Aroma handpiece Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Austin mounting technology will be applied when repairing. After repair. The handpiece will be a new one. lifetime is much longer than before
>All technical support available. We majored in diode laser mounting, software, and spare parts for over 16 years. All the technologies about laser hair removal machines are open to you.
5bar 808 macro diode laser Specification
Model No. VS-MA-50-5-GTH
Application 5bars 808 laser hair removal handpiece Repair And Replacement
|Power per submounts||50W|
|Number of submounts in one stack||5 bars|
|Central wavelength||at 25℃ 808 ± 5nm|
|Typical Operation Current||40A|
|Maximum Operating Current||50A|
|Typical Threshold current||15A|
|Maximum Operating Voltage||<10V|
|Fast Axis Divergence (FWHM)||39º|
|Slow Axis Divergence (FWHM)||8º|
|Operation Condition||non-condensing atmosphere, cleaning room|
|Expected lifetime||10000 hours|
|Typical pitch per bar||1.8 mm|
|Water Quality||Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm|
|cooling system||Do not use any material that combination with copper would form galvanic elements|