VS-MA-50-5-GTH-808 5bar macro diode laser for Aroma Handpiece Repair
OVERVIEW
808 Aroma Handpiece repair Description
5bar macro diode laser Aroma Handpiece Repair, this VS-MA-50-5-GTH is an 808nm diode laser stack, which has 5pcs bars mounted on an big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. This kinds of laser stack maybe have 3 real bars with 2 decorate bars or 4 real bars with 1 decorate bars or 5 real bars.
It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machine from China.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.
808 Aroma handpiece Repairing procedure
>Choice A: Send the old broken 808 handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
5bars 808 Aroma handpiece Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
5bar 808 macro diode laser Specification
Model No. |
VS-MA-50-5-GTH |
Application |
5bars 808 laser hair removal handpiece Repair And Replacement |
Operation Mode |
CW |
Power per submounts |
50W |
Number of submounts in one stack |
5bars |
Central wavelength at 25℃ |
808 ± 5nm |
Typical Operation current |
40A |
Maximum Operating current |
50A |
Typical Threshold current |
15A |
Maximum Operating Voltage |
<10V |
Fast Axis Divergence (FWHM) |
39º |
Slow Axis Divergence (FWHM) |
8º |
Operation Condition |
non-condensing atmosphere, cleaning room |
Expected lifetime |
10000hours |
Typical pitch per bar |
1.8mm |
Cooling requirement |
|
Flow rate |
>2.5L/min |
Water Temperature |
25+-3°C |
Water Quality |
Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
cooling system |
Do not use any material that combination with copper would form galvanic elements |
5bar macro diode laser Dimension
RELATED PRODUCTS
REVIEWS
Reviews
There are no reviews yet.