No products in the cart.

Free Delivery & 60-Day Returns* - Everyday!


No products in the cart.

Home laser stack repair 808nm Lasertel Diode Laser Stack VS-MA-50-6-B-808 300w macro diode laser stack with big cooper heatsink

VS-MA-50-6-B-808 300w macro diode laser stack with big cooper heatsink


Product Code: VS-MA-50-6-B-808
Availability: In Stock



808 6bars diode laser handle repair Description

This VS-MA-50-6-B-808 is an 808nm diode laser stack, which has 6 pcs bars mounted on a big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. water holes are on the bottom of the stack.
It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machines from China.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks. Also, we can use the same Jenoptik bar as Alma used to recondition the power of the laser soprano power.

808 6bars diode laser handle repair Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack that matches your old handpiece.

808 6bars diode laser handle repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Austin mounting technology will be applied when repairing. After repair. The handpiece will be a new one. lifetime is much longer than before
>All technical support available. We majored in diode laser mounting, software, and spare parts over 16 years. All the technologies about laser hair removal machines are open to you.

808nm 6bars diode laser Specification

Model No.                            VS-MA-50-6-B-808
Application                           808nm laser hair removal Handpiece Repair And Replacement

Operation Mode CW
Power per submounts 40W
Number of submounts in one stack 6 bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation Current 40A
Maximum Operating Current 50A
Typical Threshold current 15A
Maximum Operating Voltage <10V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condensing atmosphere, cleaning room
Expected lifetime 10000 hours
Typical pitch per bar 1.8 mm
Cooling requirement
Flow rate >2.5L/min
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements




There are no reviews yet.

Be the first to review “VS-MA-50-6-B-808 300w macro diode laser stack with big cooper heatsink”

Your email address will not be published. Required fields are marked *