No products in the cart.

Free Delivery & 60-Day Returns* - Everyday!


No products in the cart.


SKU: VS-MI-100-5-FL-A



Honkon laser 808nm handle repair Description

This VS-MI-100-5-FL-A is an 808nm diode laser stack, which has 5pcs 100w bars with black side plate and PEEK top board. Electrodes are on the back of the stack. This kinds of stack maybe have 3 real bars with 2 decorate bars or 4 real bars with 1 decorate bars or 5 real bars. 

Honkon laser 808nm Usage:

It is used for Honkon laser 808nm diode laser hair removal handpiece repairing and replacement.


Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.


Honkon laser 808nm Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 


Honkon laser 808nm handle repairing Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long life time.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. life time is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.   


Honkon laser Specification


Model No. VS-MI-100-5-FL-A
Application laser hair removal Handpiece Repair And Replacement  exp: Honkon laser
Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 5bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 85A
Maximum Operating current 100A
Typical Threshold current 15A
Maximum Operating Voltage <10V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condensing atmosphere, cleaning room
Expected lifetime 10000 hours
Typical pitch per bar 1.8mm
Cooling requirement
Flow rate 1.5L/min +-10%
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements
cooling system Do not use any material that combination with copper would form galvanic elements

Honkon laser replacement laser diode Application




There are no reviews yet.

Be the first to review “VS-MI-100-5-FL-A-808”

Your email address will not be published. Required fields are marked *