No products in the cart.

Free Delivery & 60-Day Returns* - Everyday!


No products in the cart.


SKU: VS-MI-100-8-NL3-808



808nm 8bars nlight laser stack handle Description

This VS-MI-100-8-NL3-5 includes 3 real 100w bars and 5 decorate bars.

It is used for diode laser hair removal handpiece repairing and replacement.

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power

808nm 8bars nlight laser stack handle Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

808nm 8bars nlight laser stack repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.     

808nm 8bars nlight laser stack Specification

Model No. 



808nm diode laser hair removal handpiece Repair And Replacement

Operation Mode


Power per submounts


Number of submounts in one stack

3 bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current


Maximum Operating current


Typical Threshold current


Maximum Operating Voltage


Fast Axis Divergence (FWHM)


Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10000 hours

Typical pitch per bar


Cooling requirement


Flow rate

3.6L/min +-10%

Water Temperature


Water Quality

Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

cooling system

Do not use any material that combination with copper would form galvanic elements

808nm 8bars nlight laser stack Dimension

808nm 8bars nlight laser stack Application




There are no reviews yet.

Be the first to review “VS-MI-100-8-NL3-808”

Your email address will not be published. Required fields are marked *