No products in the cart.

Free Delivery & 60-Day Returns* - Everyday!


No products in the cart.

Home laser stack repair 808nm Syneron Diode Laser Stack VS-MI-100-8-Syneron A-808 Syneron-Candala 800w laser stack

VS-MI-100-8-Syneron A-808 Syneron-Candala 800w laser stack

SKU: VS-MI-100-8-Syneron A-808



Syneron laser repair Description:

This VS-MI-100-8-Syneron A is 8 bars laser stack special for syneron-candala 808nm diode laser hair removal handpieces.

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power

Syneron laser hair removal handle Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

808 Syneron laser repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.     

808 Syneron laser diode Specification

Model NO. VS-MI-100-8-Syneron A
Application Syneron-candala 808nm diode laser hair removal Handpiece Repair And Replacement
Function Hair removal, Skin rejuvenation
Central wavelength at 25℃ 808±5nm
Laser bar Germany Jenoptik bar
Laser stack type Micro channel cooled vertical diode laser stack
Operation mode CW
Laser power 800W
Per bar power 100W
Bars number 8 pieces
Maximum operating voltage 16V
Fast axis divergence (FWHM) 39º
Slow axis divergence (FWHM)
Typical pitch per bar 1.8mm
Expected lifetime >10000 hours
Cooling system Micro channel cooler + Water + TEC
Water cooling condition 1.Flow rate: 0.3L/min ±10% / bar

2.water temperature: 15~25℃

3.Water quality: Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

4.Cooling: Don't use any material that combined with copper, that would form galvanic elements

Syneron 800w 808nm laser stack Dimension

800w laser diode syneron Application




There are no reviews yet.

Be the first to review “VS-MI-100-8-Syneron A-808 Syneron-Candala 800w laser stack”

Your email address will not be published. Required fields are marked *