VS-MA-50-10 Model G-GTHM-500-808 10bars macro diode laser with water connectors on the bottom

500W 10bars diode laser stack Description

This 500w diode laser stack 10bars Model G for hair removal which has 10bars with a aluminum shell. The straight water connectors are on the bottom with extra 2 small water connector for peltier cooling.  Electrodes are on the back of stack.
It is used for most of 808nm 500w macro diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064.
This diode laser stack usually burn out after working 1 year. Then it need to be refresh. Or you can buy a new one to replace the old one.

500W 10bars diode laser stack Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

500W 10bars diode laser stack Advantages

  >Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.                              

500W 10bars diode laser stack Specification

500W 10bars diode laser stack Dimension