VS-MA-50-6-B-808 300w macro diode laser stack with big cooper heatsink
808 6bars diode laser handle repair Description
This VS-MA-50-6-B-808 is an 808nm diode laser stack, which has 6 pcs bars mounted on an big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. water holes are on the bottom of the stack.
It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machine from China.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.
808 6bars diode laser handle repair Repairing procedure
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
808 6bars diode laser handle repair Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
808nm 6bars diode laser Specification
|Application||808nm laser hair removal Handpiece Repair And Replacement|
|Power per submounts||40W|
|Number of submounts in one stack||6bars|
|Central wavelength at 25℃||808 ± 5nm|
|Typical Operation current||40A|
|Maximum Operating current||50A|
|Typical Threshold current||15A|
|Maximum Operating Voltage||<10V|
|Fast Axis Divergence (FWHM)||39º|
|Slow Axis Divergence (FWHM)||8º|
|Operation Condition||non-condensing atmosphere, cleaning room|
|Expected lifetime||10000 hours|
|Typical pitch per bar||1.8mm|
|Water Quality||Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm|
|cooling system||Do not use any material that combination with copper would form galvanic elements|