VS-MI-100-6-FL-B-808
OVERVIEW
KES diode laser hair removal handpiece repair Description
This VS-MI-100-6-FL-B-808 is an 808nm diode laser stack, which has 6pcs 100w bars with PEEK shell and backing board. Electrodes are on the back of the stack
It is used for KES diode laser hair removal handpiece repairing and replacement.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks. Also, we can use the same Jenoptik bar as Alma used to recondition the power of the laser soprano power.
KES Laser handpiece Repairing procedure
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking, repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
KES Laser handpiece Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
KES diode laser stack Specification
Model No. VS-MI-100-6-FL-B-808
Application laser hair removal Handpiece Repair And Replacement exp: KES
Operation Mode | CW |
Power per submounts | 100W |
Number of submounts in one stack | 6 bars |
Central wavelength | at 25℃ 808 ± 5nm |
Typical Operation Current | 85A |
Typical Threshold Current | 15A |
Maximum Operating Voltage | <12V |
Fast Axis Divergence (FWHM) | 39º |
Slow Axis Divergence (FWHM) | 8º |
Expected lifetime | 10000 hours |
Typical pitch per bar | 1.8 mm |
Cooling | requirement |
Flow rate | 1.8L/min +-10% |
Water Temperature | 25+-3°C |
Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
cooling system | Do not use any material that combination with copper would form galvanic elements |
KES diode laser stack Dimension

KES diode laser stack Application

RELATED PRODUCTS
REVIEWS
Reviews
There are no reviews yet.